Climax 755 Half Face Mask Ready Pack With P3 Filters
Dashboard
Main Menu
Cart

Your shopping cart is empty!

Sub-Total: £0.00
Total: £0.00
Edit cart
Checkout
Call us now
Call us now
The Climax 755 Half Face Mask comes with two P3 Filters

The Climax 755 Half Face Mask has been designed to provide maximum protection against gases, vapours, and particles such as dust, mist and smoke. The half mask is compatible with filters Climax mod. 755 and 756. 

About P3 Filter - against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.

Between the cover and the base there is a pre-filter with a high absorption capacity against particles.

Thread connection system.

Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint. Varnishing with solvent-based paint, asbestos removal.

Protection against bacterias and viruses. Suitable for the retention of particles of welding fumes.

Filters Protection Against - See Below:
Type P, Colour White: Partical Filter

Please read full information about P3 Filters

Characteristics
Main body of the half mask:
The main body of the half mask is made from thermo-plastic rubber.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.

Exhaling valves:
The half mask is fitted with an exhaling valve made up of a valve-holder and a membrane, which makes it easier for exhaled air to escape.

Fastening harness:
It has a comfortable neck strap and head strap that can be easily adjusted to the right length.

Filters:
The filters are secured to the half mask with a thread system

Gas Filter:
A1/A2
B1-E1
K1
A1-B1-E1-K1
Partical Filter:
P3
Combined Filters:
A1-P3/A2-P3
B1-E1-P3
A1-B1-E1-K1-P3
Special Filters:
A1-B1-E1-K1-Hg-P3

CE Certification
Norm: EN 140:1999
Regulation (EU) 2016/425
Control body number: 0082

Tests
Temperature resistance: Satisfying
Breathing resistance;
Inhalation 30 I/min: Satisfying
Inhalation 95 I/min: Satisfying
Inhalation 160 I/min: Satisfying
Exhalation 160 I/min: Satisfying
CO2 content: Satisfying
Resistance against the traction elements:
Harness straps: Satisfying
Connectors: Satisfying
Exhaling valve-holder: Satisfying
Inflammability: Satisfying
Inward leakage: Satisfying
Practical behaviour: Satisfying

Use limitations
The equipment must not be used in environments where the level of oxygen is lower than 19.5%.
0/50 reviews
Write a review
Please login or register to review

Climax 755 Half Face Mask With Two P3 Filters

  • Brand: Climax
  • Product Code: MASC 755 P3
  • SKU: RS-CLM-MASK755-P3
  • Weight: 0.22kg
  • Availability: In Stock
Climax

£14.95

All Prices exc. VAT, payable during checkout at 20%.

Climax 755 Half Face Mask With Two P3 Filters

The Climax 755 Half Face Mask comes with two P3 Filters

The Climax 755 Half Face Mask has been designed to provide maximum protection against gases, vapours, and particles such as dust, mist and smoke. The half mask is compatible with filters Climax mod. 755 and 756. 

About P3 Filter - against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.

Between the cover and the base there is a pre-filter with a high absorption capacity against particles.

Thread connection system.

Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint. Varnishing with solvent-based paint, asbestos removal.

Protection against bacterias and viruses. Suitable for the retention of particles of welding fumes.

Filters Protection Against - See Below:
Type P, Colour White: Partical Filter

Please read full information about P3 Filters

Characteristics
Main body of the half mask:
The main body of the half mask is made from thermo-plastic rubber.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.

Exhaling valves:
The half mask is fitted with an exhaling valve made up of a valve-holder and a membrane, which makes it easier for exhaled air to escape.

Fastening harness:
It has a comfortable neck strap and head strap that can be easily adjusted to the right length.

Filters:
The filters are secured to the half mask with a thread system

Gas Filter:
A1/A2
B1-E1
K1
A1-B1-E1-K1
Partical Filter:
P3
Combined Filters:
A1-P3/A2-P3
B1-E1-P3
A1-B1-E1-K1-P3
Special Filters:
A1-B1-E1-K1-Hg-P3

CE Certification
Norm: EN 140:1999
Regulation (EU) 2016/425
Control body number: 0082

Tests
Temperature resistance: Satisfying
Breathing resistance;
Inhalation 30 I/min: Satisfying
Inhalation 95 I/min: Satisfying
Inhalation 160 I/min: Satisfying
Exhalation 160 I/min: Satisfying
CO2 content: Satisfying
Resistance against the traction elements:
Harness straps: Satisfying
Connectors: Satisfying
Exhaling valve-holder: Satisfying
Inflammability: Satisfying
Inward leakage: Satisfying
Practical behaviour: Satisfying

Use limitations
The equipment must not be used in environments where the level of oxygen is lower than 19.5%.
Size chart
Logo/Text Service
Ask Question

NOTICE: Modification on your logo, like a colour or text modification, will be charged extra by £10-£15.

0/50 reviews
Write a review
Please login or register to review
Size chart
Logo/Text Service
Ask Question

ESTIMATE DELIVERY

FREE DELIVERY 48:

OVER £99

NEX WORKING DAY:

1 DAY

STANDARD 48:

2 DAYS

ECONOMY:

3-5 DAYS
SAME DAY DISPATCH*

*If you place your oder before 11am

Please read our full Delivery Policy


New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
Онлайн курсы IT