Climax Filter 757/762-P3 UNITS

(1x) 757 P3 Reusable filter - Sold in Single.

The Climax filter 757 P3 is designed to be used with the half masks Climax mod. 732, mod. 757 and 820.

Reusable Filter P3 against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.

Between the cover and the base there is a pre-filter with a high absorption capacity against particles.

Bayonet connection system.

Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint.

Varnishing with solvent-based paint, asbestos removal.

Protection against bacterias and viruses.

Suitable for the retention of particles of welding fumes.

R mark: Reusable filter

Type P, Colour White: Partical Filter

Continuous inhaled flow resistance:

At 15 I/min: Satisfying

At 47,5 l/min: Satisfying

Filtering effectiveness 99,95% against a;

NaCI aerosol: Satisfying

Paraffin mist: Satisfying

Filter penetration after the clogging test with dolomite dust: Satisfying

This equipment should not be used in the following situations:

· Oxygen-Deficient atmospheres. (less than 19,5%)

· Immediately dangerous to life or health (IDHL)

· Unknown contaminants.

· Unknown concentrations of contaminants

Skilled persons who have been adequately trained or who use the belt under the supervision of a competent supervisor may only use the filter 757.

Norms: EN 143:2000+A1:200.

Regulation (UE) 2016/425

Control body number: No0161