Climax Filter 757-N A1P3 (Pair)

(2x) 757 A1P3 Reusable filter - Sold in Pair.

The Climax filter 757-N A1P3 R is designed to be used with the half masks Climax mod. 732, mod. 757 and 820.

Filter A1, against gases and vapours from chemical compounds made up of a high-density polyethylene black base fitted with a round cover made up with the same material.

Filter P3 against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.

Between the cover and the base there is a pre-filter with a high absorption capacity against particles.

Bayonet connection system.

Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint.

Varnishing with solvent-based paint, asbestos removal.

Protection against bacterias and viruses.

Suitable for the retention of particles of welding fumes.

R mark: Reusable filter

Protection Against - See Below:
Type A, Colour Brown: Organic gases and vapours with boiling point> 65 oC

Type P, Colour White: Partical Filter

Continuous inhaled flow resistance:

At 15 I/min: Satisfying

At 47,5 l/min: Satisfying

Filtering effectiveness 99,95% against a;

NaCI aerosol: Satisfying

Paraffin mist: Satisfying

Filter penetration after the clogging test with dolomite dust: Satisfying

This equipment should not be used in the following situations:

· Oxygen-Deficient atmospheres. (less than 19,5%)

· Immediately dangerous to life or health (IDHL)

· Unknown contaminants.

· Unknown concentrations of contaminants

Skilled persons who have been adequately trained or who use the belt under the supervision of a competent supervisor may only use the filter 757.

Norms: EN 143:2000+A1:200.

Regulation (UE) 2016/425

Control body number: No0161