Climax 755 Safety Respirator with Two P3 Filters
Popular
Hit
Shipping Information
Found cheaper?
Enter a delivery address
Description
The Climax 755 Half Face Mask comes with two P3 Filters
The Climax 755 Half Face Mask has been designed to provide maximum protection against gases, vapours, and particles such as dust, mist and smoke. The half mask is compatible with filters Climax mod. 755 and 756.
About P3 Filter - against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.
Between the cover and the base there is a pre-filter with a high absorption capacity against particles.
Thread connection system.
Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint. Varnishing with solvent-based paint, asbestos removal.
Protection against bacterial and viruses. Suitable for the retention of particles of welding fumes.
Filters Protection Against - See Below:
Type P, Colour White: Partical Filter
Please read full information about P3 Filters
Characteristics
Main body of the half mask:
The main body of the half mask is made from thermoplastic rubber.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.
The design and the material used allow it to adjust to the face in an airtight manner, preventing air from leaking into the interior through the face/mask join.
The main body houses the two filter connectors and the exhaling valve.
Exhaling valves:
The half mask is fitted with an exhaling valve made up of a valve-holder and a membrane, which makes it easier for exhaled air to escape.
Fastening harness:
It has a comfortable neck strap and head strap that can be easily adjusted to the right length.
Filters:
The filters are secured to the half mask with a thread system
Combined Filters:
A1-P3/A2-P3
A1-P3/A2-P3
B1-E1-P3
A1-B1-E1-K1-P3
Special Filters:
A1-B1-E1-K1-Hg-P3
CE Certification
Norm: EN 140:1999
Regulation (EU) 2016/425
Control body number: 0082
Tests
Temperature resistance: Satisfying
Breathing resistance;
Inhalation 30 I/min: Satisfying
Inhalation 95 I/min: Satisfying
Inhalation 160 I/min: Satisfying
Exhalation 160 I/min: Satisfying
CO2 content: Satisfying
Resistance against the traction elements:
Harness straps: Satisfying
Connectors: Satisfying
Exhaling valve-holder: Satisfying
Inflammability: Satisfying
Inward leakage: Satisfying
Practical behaviour: Satisfying
Use limitations
The equipment must not be used in environments where the level of oxygen is lower than 19.5%.
Reviews 0
-
There are no reviews for this product.
FAQ 0
-
No questions yet
Related Products
Hit
In stock
Product code: P304 FFP3 Valved Dolomite Light Cup Safety Respirator White Pack of 10 piece
£9.40
Hit
In stock
Product code: MASC 755 A1 Climax 755 Safety Half Face Respirator Mask With Two A1 Filters
£10.95
In stock
Product code: P371 Safety Respirator Ergonet FFP3 valved dolomite white Pack of 5 pieces
£10.70
